Cadillac Escalade 2020 Owner'S Manual Download Page 42

Page: 42 / 355

Cadillac Escalade Owner Manual (GMNA-Localizing-MidEast-13566599) -

2020 - CRC - 5/29/19

SEATS AND RESTRAINTS

Press and hold the control down
to increase lower lumbar support
and decrease upper lumbar
support.

Uplevel Seat Adjustment

To adjust lumbar support, if equipped:

Press and release or hold Feature
Select (1) to scroll to lumbar
support on the infotainment
display.

Press Forward (5) or Rearward (3)
to adjust lumbar forward or
rearward.

Press Up (2) or Down (4) to adjust
lumbar up or down.

To adjust bolster support, if equipped:

Uplevel Seat Adjustment

Press and release or hold Feature
Select (1) to scroll to bolster
support on the infotainment
display.

Press Forward (5) or Rearward (3)
to adjust bolster support inward or
outward.

Upper Shoulder Support

To adjust upper shoulder support,
if equipped:

Press and release or hold Feature
Select (1) to scroll to upper
shoulder support on the
infotainment display.

Press Forward (5) or Rearward (3)
to adjust shoulder support forward
or rearward.

Summary of Contents for Escalade 2020




































































































































































































































































































































































Search results

Summary of Contents for Escalade 2020

Reviews:

Related manuals for Escalade 2020

Brands by name

Popular brands

Cadillac Escalade 2020, Owner'S Manual

Search results

Summary of Contents for Escalade 2020

Reviews:

Related manuals for Escalade 2020

Brands by name

Popular brands