Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 726 / 1940

674 Brocade Network Advisor SAN User Manual
53-1003154-01
Configuring routing domain IDs
18
9. Configure LSAN zones in each fabric that will share devices.
For specific instructions, refer to “Configuring LSAN zoning” on page 911.
Configuring routing domain IDs
Logical (phantom) domains are automatically created to enable routed fabrics. Two types of logical
domains are created:
•
A front domain is created in edge fabrics for every interfabric link (IFL).
•
A translate (Xlate) domain is created in routed fabrics that share devices.
You can change the domain IDs of these logical domains.
1. In the Product List or Connectivity Map, right-click the fabric for which you want to configure
logical domains, and select Routing Domain IDs.
The Configure Routing Domain IDs dialog box is displayed ( Figure 262 ).
FIGURE 262
Configure Routing Domain IDs dialog box
2. Right-click anywhere in the Available Switches list and select Expand All in the right-click menu.
The switch group for the fabric expands to display the logical domains.
3. Select a logical domain, and click the right arrow button to move the switch to the Selected
Switches list.
4. Select a domain ID number from the Domain ID column in the Selected Switches list. The
Domain ID column lists unused domain IDs.
You may need to scroll right or drag the dialog box open further to see the Domain ID column.
5. Click OK.