Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 1052 / 1940

1000 Brocade Network Advisor SAN User Manual
53-1003154-01
Adding thresholds
24
FIGURE 454
Add C3 Discard Frames Threshold dialog box
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
•
Default — Uses device defaults. Go to step 8 .
•
Custom — Uses your selections. Continue with step 6 .
6. Enter the number of C3 discarded frames allowed for the threshold in the Threshold errors
field.
7. Select the time period for the threshold from the errors per list. The following choices are
available:
•
None — the port is blocked as soon as the specified number of C3 discarded frames
allowed is met.
•
Second — the port is blocked as soon as the specified number of C3 discarded frames
allowed is reached within a second.
•
Minute — the port is blocked as soon as the specified number of C3 discarded frames
allowed is reached within a minute.
•
Hour — the port is blocked as soon as the specified number of C3 discarded frames
allowed is reached within a hour.
•
Day — the port is blocked as soon as the specified number of C3 discarded frames allowed
is reached within a day.
8. Click OK to add the C3 discarded frames threshold to the table and close the Add C3 Discard
Frames Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 1007.
9. Click OK on the Port Fencing dialog box.