Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 49 / 1940

Brocade Network Advisor SAN User Manual xlix
53-1003154-01
-
Performance Data

Configuring a monitor from a performance graph

IP real-time performance monitoring

Traffic flow dashboard monitors
-
VLAN Management

VLAN Manager

Port VLAN
•
Information that was deleted:
-
License support for Ethernet fabrics
For further information about new features and documentation updates for this release, refer to
the release notes.
Document conventions
This section describes text formatting conventions and important notice formats used in this
document.
Text formatting
The narrative-text formatting conventions that are used are as follows:
bold text Identifies command names
Identifies the names of user-manipulated GUI elements
Identifies keywords and operands
Identifies text to enter at the GUI or CLI
italic text Provides emphasis
Identifies variables
Identifies paths and Internet addresses
Identifies document titles
code
text Identifies CLI output
Identifies command syntax examples
For readability, command names in the narrative portions of this guide are presented in mixed
lettercase: for example, switchShow. In actual examples, command lettercase is all lowercase.
Notes, cautions, and warnings
The following notices and statements are used in this manual. They are listed below in order of
increasing severity of potential hazards.
NOTE
A note provides a tip, guidance, or advice, emphasizes important information, or provides a
reference to related information.
ATTENTION
An Attention statement indicates potential damage to hardware or data.