manualshive.com logo in svg

Brocade Communications Systems Network Advisor 12.3.0, User Manual

Share
Download
Brocade Communications Systems Network Advisor 12.3.0 User Manual Download Page 1443

Brocade Network Advisor SAN User Manual

1391

53-1003154-01

Device technical support

34

Copying technical support information to an external FTP server

NOTE

You cannot copy technical support information to an external FTP server collected from the remote 
client. 

To copy the SupportSave data located in the built-in FTP server to an external FTP server, complete 
the following steps.

1. Select Monitor > Technical Support > View Repository.

The Technical Support Repository dialog box displays.

2. Select the file you want to copy in the table. 

3. Click FTP to send the switch event and supportsave files (zip) by FTP.

NOTE

The FTP button is unavailable from the remote client.

The FTP Credentials dialog box displays.

4. Enter the network address or domain name of the external FTP server in the Network Address 

field.

5. Enter your user name and password.

6. Enter the destination directory where you want to copy the data on the external FTP server in 

the Destination Directory field.

The destination directory should be the sub directory of the external FTP server’s root directory. 
For example, if you enter “repository” as the destination directory, then the support save file is 
copied to the “/repository” directory of the external FTP server.

7. Click OK.

The data is copied and the Technical Support Repository dialog box closes automatically.

Deleting technical support files from the repository

To delete a technical support file from the repository, complete the following steps.

1. Select Monitor > Technical Support > View Repository.

The Technical Support Repository dialog box displays.

2. Select the file you want to delete in the table. 

3. Click Delete.

4. Click OK on the Technical Support Repository dialog box.

Summary of Contents for Network Advisor 12.3.0





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands