Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 1167 / 1940

Brocade Network Advisor SAN User Manual 1115
53-1003154-01
SAN connection utilization
28
2. Enter or select the end percentage you want for the blue line.
When you make a change to the end percentage of a utilization line, you also change the start
percentage for the utilization line immediately above the one you changed when you click
apply. For example, if you change the blue line end percentage to 60 the yellow line start
percentage changes to 60 when you click apply.
3. Enter or select the end percentage you want for the yellow line.
4. Click the apply link.
The new values appear in the Utilization Legend.
Configuring the performance graph display
Use the procedure procedure to configure the graph display for the Real Time Graphs/Tables dialog
box and Historical Graphs/Tables dialog box as well as time series monitors on the Dashboard ta.
1. Right-click the graph and select one of the following options:
•
Select the Show Controls check box to show or hide additional display options on the
graph (refer to
step 2 through step 8 for more information).
•
Select the Show Legend check box to show or hide the measurements beneath the graph.
•
Select Clear Graph to clear the graph.
•
Select Delete Selected Measures to delete the selected measures from performance.
•
Select Zoom In to zoom in on the graph.
•
Select Zoom Out to zoom out on the graph.
•
Select Fit in window to fit the graph in the window.
•
Select Go to Latest to go to the latest data point on the graph.
•
Select the Use Logarithmic Axis check box to present data on a logarithmic or
non-logarithmic axis.
•
Select the Show Values check box to annotate data point values in the graph.
•
Select the Enable Auto Scrolling check box to automatically jump to display the new data
when new data is collected while the graph is in view.
•
Select the Enable Transition Effect check box to automatically adjust the range on the
vertical axis so that all the data are contained within the view area when you drag the
chart into a different time range on the SNMP monitoring graph.
•
Select Plot Min/Max to plot minimum and maximum values along with the average data
point. This option is not available if minimum interval granularity (5 minutes for a SAN
historical graph) is selected. The width of the color band displayed on the graph indicates
the variation during the time period.
•
Select Show Events to display advanced monitoring service (AMS) violation events
received during the chart time range and master log events logged on the same product as
the measure being plotted.
•
Select Chart Styles to display data as a line chart, area chart, or bar chart.
•
Select Options to launch the Graph Options dialog box. Refer to “Configuring graph
options” on page 1116 for more information.
•
Select Export to export to a spreadsheet (.csv) or an image (.png).
•
Select Print to print the graph.