Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 152 / 1940

100 Brocade Network Advisor SAN User Manual
53-1003154-01
Name settings
4
Removing a name from a device
1. Select Configure > Names.
The Configure Names dialog box displays.
2. In the Display table, select the name you want to remove.
3. Click Remove.
An application message displays asking if you are sure you want clear the selected name.
4. Click Yes.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.
Editing names
To edit the name associated with a device, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Select All Names from the Display list.
Only devices with a name display. The table displays the Name, WWN, Operational Status,
Type, and a Description of the device.
3. Click the name you want to edit in the Name column.
4. Edit the name and press Enter.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.
Exporting names
To export the names associated with devices, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Click Export.
The Export Files dialog displays.
3. Browse to the location where you want to save the export file.
Depending on your operating system, the default export location are as follows:
•
Desktop\My documents (Windows)
•
\root (Linux)
4. Enter a name for the file and click Save.
5. Click OK to close the Configure Names dialog box.