Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 1265 / 1940

Brocade Network Advisor SAN User Manual 1213
53-1003154-01
Flow Vision interoperability with other features
29
Configuring LUN Monitoring predefined template
The LUN Monitoring template creates flow rows like Static Flow template including the LUN ID field.
You can configure LUN ID for the flows as shown in
Figure 524 .
FIGURE 524
Add Flow Definition - LUN Monitoring template dialog box
Perfom the following steps, in the Add Flow Definition - LUN Monitoring dialog box:
The default Device View is Port Address.
1. The Flow Name field is filled with the predefined flow name and the format is
<portname>_<last 4 digits of the source device WWN>_<last 4 digits of the destination device
WWN>.
2. Click the ellipsis button next to the LUN Monitoring field, to configure LUN ID.
Continue from step 2 through step 6 in “Configuring Static Flow template” on page 1209" to
deploy the flow definition.
Flow Vision interoperability with other features
Flow Vision integration with other Management application features enables you to create flows
from discarded frames, bottlenecked ports, routing information (Trace Route), and port
connectivity. You can also monitor flows from the Dashboard and the Performance graphs.
Frame Viewer integration with Flow Vision
You can create a flow definition for a single discarded frame. For more information about Frame
Viewer and viewing discarded frames, refer to
“Frame viewer” on page 697".