Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 1457 / 1940

Brocade Network Advisor SAN User Manual 1405
53-1003154-01
Deleting SAN reports
35
Deleting SAN reports
To delete reports, complete the following steps.
1. Select Reports > View or click the View Report icon.
The View Reports dialog box displays.
2. Select the report you want to delete in the All Reports list.
You can select reports by Time, Report Type, or User.
3. Click Delete Report.
ATTENTION
Once you click Delete Report, the report is deleted without confirmation.
4. Click Close to close the View Reports dialog box.
5. Click Yes on the “are you sure you want to close” message.
Generating SAN performance reports
NOTE
Performance reports require a SAN Trial or Licensed version.
To generate a historical performance report for a device, complete the following steps.
1. Select the device for which you want to generate a performance report.
2. Choose one of the following options:
•
Select Monitor > Performance > Historical Report.
OR
•
Right-click the device and select Performance > Historical Report.
The HIstorical Performance Table dialog box displays.
3. Filter the historical data by completing the following steps.
a. Select the number of results to display from the Display list.
b. Select the ports from which you want to gather performance data from the From list.
NOTE
Devices with 10GE ports must be running Fabric OS 6.4.1ltd or later to obtain the correct
TE port statistics (TX/RX).
If you select Custom, complete the following steps.
i. Select the type of ports from the Show list.
ii. Right-click a device in the Available table and select Expand All.