Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 711 / 1940

Brocade Network Advisor SAN User Manual 659
53-1003154-01
Layer 2 access control list management
17
5. To add a new ACL rule, complete step 4 through step 12 in “Creating an extended Layer 2 ACL
configuration (Fabric OS)” on page 656.
The new ACL entry displays in the ACL Entries list. To add additional ACL entries, repeat step 5 .
6. To delete an existing ACL rule, select the rule you want to edit in the ACL Entries list and click
the left arrow button.
7. Click OK on the Duplicate - Layer 2 ACL Configuration dialog box.
The new ACL displays in the ACL Entries list. To copy additional ACLs, repeat step 2 through
step 7 .
8. Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
“Saving a security configuration deployment” on page 664
Assigning a Layer 2 ACL configuration to an interface (Fabric OS)
To assign Layer 2 ACL configuration to a interface, complete the following steps.
1. Select Configure > Security > Layer 2 ACL > Port.
The Port Selection - Layer 2 ACL dialog box displays.
2. Select a port or Link Aggregation Group (LAG) in the Available Ports list and click the right arrow
button.
LAGs display in the Available Ports list using the following convention: Po LAG_Number.
3. Click OK.
The Device_Name - Port_Number/ LAG LAG_Number - Layer 2 ACL Configuration dialog box
displays.
FIGURE 255 Device_Name - Port_Number - Layer 2 ACL Configuration dialog box
4. Select the Assign ACL option and choose one of the following options from the first Assign ACL
list:
•
Select ACLs on this Product to assign ACLs deployed on the product to the port.
The second list is populated with the ACLs deployed on the switch or associated with a
save deployment object.
•
Select ACLs bound to this port to assign ACLs bound to the interface to the port.
The second list is populated with the ACLs bound to the interface.