Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 1529 / 1940

Brocade Network Advisor SAN User Manual 1477
53-1003154-01
Viewing SAN device properties
E
2. To view port properties, select one of the following tabs.
The following port types are available depending on the selected device:
•
FC Ports
•
GigE Ports
•
IP Ports
•
iSCSI Ports
•
Virtual Sessions Ports
Sequence number The sequence number of the switch.
Serial # The hardware serial number.
Slot # The slot number of the trunk.
Source IP Address The IP address of the of the FCIP tunnel source device.
Speed (Gb/s) The speed of the port in gigabits per second.
State The device’s state, for example, online or offline.
Status The operational status.
Switch Name The switch name.
Switch IP The switch IP address.
Switch WWN The switch world wide name.
Tape Pipelining Whether tape pipelining is on or off for the FCIP tunnel.
Tunnel ID The tunnel identifier.
Type The device type.
Unit Type The unit type of the node.
Vendor The product vendor.
# Virtual FCoE port count The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.
VLAN # The VLAN number of the FCIP tunnel.
VLAN Class of Service for Control
Connection The VLAN class of service for the control connection of the FCIP tunnel.
VLAN Class of Service for Data
Connection The VLAN class of service for the data connection of the FCIP tunnel.
VLAN ID The VLAN identification number.
WWN The world wide name of the device.
Add button Click to add a user-defined property. For more information, refer to
“Adding a property field” on page 1492.
Edit button Click to edit a user-defined property. For more information, refer to
“Editing a property field” on page 1493.
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 1493.
TABLE 137 Device properties (Continued)
Field/Component Description