Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 590 / 1940

538 Brocade Network Advisor SAN User Manual
53-1003154-01
Port commissioning
12
Recommissioning all ports on a blade
NOTE
All ports on the blade must be managed by the Management application.
Select a port on the blade for which you want to recommission all ports, and then select Configure
> Port Commissioning > Recommission > All Ports on the Blade.
NOTE
You can only recommission ports from the logical switch, not the physical chassis.
While recommissioning is in progress, an up arrow icon displays next to the port icon in the Product
List. You can view the port commissioning results in the deployment reports (refer to
“Viewing a
port commissioning deployment report” on page 539).
When the recommission is complete, an application event displays in the Master Log detailing
success or failure.
Port commissioning deployment results
FIGURE 216
Port commissioning deployment results
The Deployment Results contains the following data:
•
Date and Time — The date and time of the deployment.
•
Export — Select to export the results to CSV or HTML (refer to “Exporting and saving a report to
a file” on page 540).
•
Email — Select to e-mail the results (refer to “E-mailing a report” on page 540).