Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 1067 / 1940

Brocade Network Advisor SAN User Manual 1015
53-1003154-01
Removing thresholds
24
If an inherited threshold replaces the removed threshold, an added icon ( ) displays next to
every instance where the threshold was replaced.
A directly assigned icon ( ) displays next to each object with an assigned threshold which
does not inherit a threshold from higher in the tree.
NOTE
If you remove a threshold from All Fabrics, it removes the threshold from individual Fabrics,
switches, and switch ports in all Fabrics except for a Chassis group. You must remove repeat
the procedure for the Chassis group.
5. Click OK on the Port Fencing dialog box.
Removing thresholds from the thresholds table
To remove thresholds from all Fabrics, Switches, and Switch Ports as well as the Threshold table,
complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
The Port Fencing dialog box displays.
2. Select a threshold type from the Violation Type list.
3. Select the threshold you want to remove in the Thresholds table.
4. Click Delete.
A removed icon ( ) displays next to the selected threshold in the Thresholds table when you
click Delete.
5. Click OK on the Port Fencing dialog box.