manualshive.com logo in svg

Brocade Communications Systems Network Advisor 12.3.0, User Manual

Share
Download
Brocade Communications Systems Network Advisor 12.3.0 User Manual Download Page 1377

Brocade Network Advisor SAN User Manual

1325

53-1003154-01

Event logs

32

Notes on filters 

•

Changing the filter in one client session does not alter the filter selection on other clients. 
However, if the currently selected filter is updated, once the filter is saved, the Master Log is 
reloaded to reflect the changes to that filter. This affects all your client sessions.

•

If the currently selected filter is deleted, the Master Log is reloaded, and changes the selected 
filter to none for all your client sessions.

•

Copying user preferences includes all user-created filters.

•

For default filters, you are allowed to select a host from the Available Products list and include 
it in the Selected Products to be displayed list only if the host is managed by the Management 
application.

Summary of Contents for Network Advisor 12.3.0





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands