Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 1779 / 1940

Brocade Network Advisor SAN User Manual 1727
53-1003154-01
Database tables and fields
H
FCIP_CIRCUIT_CAPABLE Whether the switch can create FCIP Circuits. 1 means
true and 0 means false.
Default value is 0. smallint
DISCOVERED_PORT_COUN
T Reflects the number of managed ports in the
discovered switch.
Default value is 0. smallint
LAST_PORT_MEMBERSHIP
_CHANGE Stores the timestamp of the last port member ship
update. bigint
MAX_FCIP_TUNNELS The maximun number of tunnels that can be created
in this switch,-1 means not supported.
Default value is -1. int
MAX_FCIP_CIRCUITS The maximun number of circuits that can be created
in this switch, -1 means not supported.
Default value is -1. int
FCIP_LICENSED FCIP Advanced Extension Licensing is available. 1
means licensed and 0 means not licensed, -1 means
not supported.
Default value is -1. smallint
ADDRESSING_MODE This column to represent the logical switch
addressing modes to assign Port Addresses, There
are three different addressing modes supported.
Fixed (0), Flat or 10 bit (1), Dynamic (2).
Default value is -1. smallint
PREVIOUS_STATE This fields copies the old state of the switch . The
field could be used to track the state change
information for the switch.These values to be
populated by FCS during Fabric Refresh task.SMIA
requested this information but could be used by any
module which needs to track the state change varchar 32
MANAGED_ELEMENT_ID A unique managed element ID for this virtual switch.
Also a foreign key reference to the
MANAGED_ELEMENT table. int
HIF_ENABLED The HIF Enabled bit on the switch. Values are 1 for
enabled and 0 for not enabled. -1 the default, stands
for not supported and will be used for older
firmwares.
Default value is -1. smallint
CLUSTER_MODE This column is used to determine whether VCS
Cluster is in Standalone mode or Cluster mode. The
values will be populated by the VCS collector during
the discovery of the VCS switch. The default value of
-1 means that its a non VCS device. Following Enum
will be defined as NON_VCS(-1), STANDALONE(0),
CLUSTER(1). smallint
VCS_ID This column is used to store the VCS ID of the device.
The value will be populated by the
NosSwitchAssetCollector during the discovery of the
VCS Cluster. The non zero value will be stored as VCS
ID. Default value is -1. smallint
TABLE 458 VIRTUAL_SWITCH (Continued)
Field Definition Format Size