Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 661 / 1940

Brocade Network Advisor SAN User Manual 609
53-1003154-01
DCB configuration
16
6. Click the right arrow button to add the map to the DCB Maps list.
If a DCB map exists with the same name, a validation dialog box launches and you are asked if
you want to overwrite the map.
7. Click OK.
8. When you have finished the configuration, click OK to launch the Deploy to Products dialog
box.
Configuring LLDP
To configure LLDP, complete the following steps.
1. Select Configure > DCB.
The DCB Configuration dialog box displays.
2. Select the switch to edit from the Product/Ports list and click Edit.
The Edit Switch dialog box displays.
3. Click the LLDP-DCBX tab.
The Edit Switch dialog box - LLDP-DCBX tab displays, as shown in Figure 233 .
FIGURE 233
Edit Switch dialog box - LLDP-DCBX tab
4. Select the Global Configuration LLDP profile in the LLDP Profiles list.
5. Click the left arrow button to edit.
6. Select the FCoE Application and FCoE Logical Link check boxes in the Advertise list to
advertise them on the network.