Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 145 / 1940

Brocade Network Advisor SAN User Manual 93
53-1003154-01
Flyover settings
4
7. Add connection properties you want to display on flyover by selecting the Connection tab
( Figure 29 ) and completing the following steps.
FIGURE 29
Options dialog box (Flyovers pane, Connection tab)
a. Select the
protocol
type from the Type list, if necessary.
Depending on which protocol you select, some properties may not be available for all
protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
FC (default)
FCoE
•
Active FC4 Types
•
Address
•
Attached Port#
•
Blocked Configuration
•
Class of Service
•
Device Type
•
Fabric
•
FC Address
•
IP Address
•
Master Port #
•
Max Frame Size (bytes)
•
Name
•
Name (port)
•
Node WWN
•
Operational State
•
OS Device Name
•
Port #
•
Port Blocked Reason
•
Port State
•
Port Type
•
Port WWN
•
Speed Configured (Gbps)
•
Speed Supported (Gbps)
•
Symbolic Name
•
Supported FC4 Types
•
Zone Alias