Brocade Communications Systems Network Advisor 12.3.0, User Manual

Page: 1347 / 1940

Brocade Network Advisor SAN User Manual 1295
53-1003154-01
Pseudo events
32
8. Continue to advance through the Add Event Action dialog box. The Summary pane of the Edit
Event Action dialog box displays an overview of the e-mail configuration you are creating.
9. Review your entries and take one of the following actions:
-
Click Finish to approve the configuration.
-
Click Previous to return to the Action Group - E-Mail Settings pane of the dialog box.
-
Click Cancel to cancel the operation.
Pseudo events
A pseudo event is a combination of different SNMP traps that you decide would constitute a single
event. For example, there are two separate SNMP traps for link up and link down occurrences. You
might decide that these two occurrences should be just one event.
Displaying pseudo event definitions
To display the properties of a pseudo event definition, complete the following steps.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box, shown in Figure 561 , displays.
FIGURE 561
Pseudo Events dialog box
2. To view additional information for a definition, select a definition from the list. Additional
information displays in the Details of Selected Pseudo Event list at the bottom of the dialog
box.
Creating pseudo event definitions
To create a pseudo event definition, complete the following steps.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box, shown in Figure 561 , displays.