Baby Lock Solaris VISION BLSA3 Instruction And Reference Manual Download Page 83

Page: 83 / 204

COMBINING PATTERNS

Bas
ic Ed

iti

Touch

to enter the alphabet

characters.

Touch

to return to the previous screen.

Select

and enter “LOVE”.



The characters you enter will be displayed in the
center of the display.

Touch

to change the layout of the

characters. Touch

Refer to page 73 for more information about
changing the layout.

Touch

and then touch

Touch

and then use

to move

the characters. Touch

With your finger, the included dual purpose stylus
or fine tipped stylus pen, drag the characters to
move them.

Touch

to change the color of the

characters. Touch

Refer to page 76 for more information about
changing the color.

Summary of Contents for Solaris VISION BLSA3













































































































































































































Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands

Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands