Baby Lock Solaris VISION BLSA3 Instruction And Reference Manual Download Page 60

Page: 60 / 204

BASIC EDITING

Previewing the Pattern

Touch .



An image of the pattern as it will be embroidered
appears.

Touch

to select the frame

used in the preview.

Frames displayed in light gray cannot be selected.

Touch

to enlarge the image of the pattern.

The pattern can be embroidered as it appears in the
following display.

Touch

to check the embroidering

order.



The stitch simulator screen appears.

Select the simulation speed. Touch

to change the speed. The speed can even be

changed while the simulation is running.

Play/Pause

When touching

, icon changes to

Return to beginning.

Touch

to return to the embroidery frame

selection screen.

Touch .

BASIC EDITING

Summary of Contents for Solaris VISION BLSA3













































































































































































































Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands

Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands