Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

Page: 32 / 204

PREPARING THE FABRIC
30
b
Place the embroidery sheet on the inner
frame. Align the guide lines on the
embroidery sheet with the mark you made
on the fabric.
a
Inner frame
b Guide line
c
Gently stretch the fabric so there are no
folds or wrinkles, and press the inner frame
into the outer frame.
a Inner frame
b Outer frame
d
Remove the embroidery sheet.
■
Embroidery Needle Plate Cover
Under some conditions, based on the type of fabric,
stabilizer, or thread being used, there may be some
looping in the upper thread. In this case, attach the
included embroidery needle plate cover to the
needle plate. Attach the cover by inserting the two
projections on the underside of the cover into the
notches on the needle plate as shown below.
a Groove
b
Projection
c Notch
To remove the embroidery needle plate cover, place
your fingernail in the groove and lift the plate out.
CAUTION
• Push the embroidery needle plate cover as far
as possible to attach it. If the embroidery
needle plate cover is not securely attached, it
may cause the needle to break and cause
injury.
Note
• Do not use the embroidery needle plate cover
for any applications other than embroidery.