manualshive.com logo in svg

Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

The Baby Lock Solaris VISION BLSA3 offers cutting-edge technology and exceptional sewing capabilities. Enhance your sewing experience with our Quick Reference Manual, available for free download at manualshive.com, providing users with easy access to essential information and detailed instructions. Unlock the true potential of your Solaris VISION BLSA3 with this user-friendly manual.

Share
Download
background image

TROUBLESHOOTING

197

A

ppe

nd
ix

5

■

After Embroidering

Problem

Cause

Solution

Page

Thread tension is 
incorrect.

Upper threading is incorrect.

Check the steps for threading the machine and 
rethread the machine.

21

Bobbin is set incorrectly.

Reset the bobbin. (If needle plate was 
removed, reinstall needle plate.)

19

Using improper needle or thread for the 
selected fabric.

Check the needle and fabric combination.

11, 49

Thread tension is set incorrectly.

Adjust the thread tension.

92

Bobbin thread is incorrectly wound.

Use a correctly wound bobbin.

15

Needle is turned, bent or the point is dull.

Replace the needle.

11

A bobbin designed specifically for this 
machine is not used.

Use a bobbin designed specifically for this 
machine.

15

Embroidery pattern 
does not embroider 
out correctly.

Thread is twisted.

Use scissors, etc., to cut the twisted thread 
and remove it from the bobbin case, etc.

—

Thread tension is set incorrectly.

Adjust the thread tension.

92

Fabric was not inserted into the frame 
correctly (fabric was loose, etc.).

If the fabric is not stretched tight in the frame, 
the pattern may turn out poorly or there may 
be shrinkage of the pattern. Set the fabric into 
the frame correctly.

28

Stabilizing material was not attached.

Always use stabilizing material, especially with 
stretch fabrics, lightweight fabrics, fabrics with 
a coarse weave, or fabrics that often cause 
pattern shrinkage. See your authorized Baby 
Lock retailer for the proper stabilizer.

26

There was an object placed near the machine, 
and the carriage or embroidery frame hit the 
object during embroidering.

If the frame bumps something during 
embroidering, the pattern will turn out poorly. 
Do not place anything in the area where the 
frame may bump it during embroidering.

—

Fabric outside the frame edges interferes with 
the free arm, so the embroidery unit cannot 
move.

Reinsert the fabric in the embroidery frame so 
that the excess fabric is away from the free 
arm, and rotate the pattern 180 degrees.

28

Fabric is too heavy, so the embroidery unit 
cannot move freely.

Place a large thick book or similar object near 
the embroidery unit to lightly lift the heavy side 
and keep it level. Ensure that this object will 
not interfere with the movement of the 
embroidery arm or frame.

—

Fabric is hanging off the table.

If the fabric is hanging off the table during 
embroidery, the embroidery unit will not move 
freely. Place the fabric so that it does not hang 
off the table or hold the fabric to keep it from 
dragging.

49

Fabric is snagged or caught on something.

Stop the machine and place the fabric so that 
it does not get caught or snagged.

—

Embroidery frame was removed during 
embroidering (for example, to reset the 
bobbin). The embroidery foot was bumped or 
moved while removing or attaching the 
embroidery frame, or the embroidery unit was 
moved.

If the embroidery foot is bumped or the 
embroidery unit is moved during embroidering, 
the pattern will not turn out. Be careful when 
removing or reattaching the embroidery frame 
during embroidering.

52

Stabilizer is incorrectly attached, for example, 
it is smaller than the embroidery frame.

Attach the stabilizer correctly.

26

When restarting embroidering, for example, 
after the thread breaks, it may not be possible 
to continue embroidering, depending on the 
embroidery pattern.

Press the “Reinforcement Stitch” button to 
sew reinforcement stitches at the beginning of 
sewing, and then restart embroidering.

53

Loops appear on the 
surface of the fabric 
when embroidering.

The thread tension is incorrectly set.

Adjust the thread tension.

92

The tension of the upper thread is incorrectly 
set for the combination of the fabric, thread 
and pattern being used.

Use the embroidery needle plate cover.

30

The combination of the bobbin case and 
bobbin thread is incorrect.

Change the bobbin case or bobbin thread so 
that the correct combination is used.

49

Summary of Contents for Solaris VISION BLSA3













































































































































































































Reviews:

No comments

Related manuals for Solaris VISION BLSA3

Magtek EXPRESSCARD 1000 User'S Installation And Operation Manual preview
EXPRESSCARD 1000
Brand: Magtek Pages: 37
handi quilter HQ Sweet Sixteen Service And Troubleshooting Manual preview
HQ Sweet Sixteen
Brand: handi quilter Pages: 30
Siruba Sew Reach ABF Series Instruction Book / Parts List preview
Sew Reach ABF Series
Brand: Siruba Pages: 74
Unicorn LS2-H550 Operation Manual preview
LS2-H550
Brand: Unicorn Pages: 43
Jack JK-1900BSK Manual preview
JK-1900BSK
Brand: Jack Pages: 42
Savin Savinfax 3670 Operator'S Manual preview
Savinfax 3670
Brand: Savin Pages: 143
JUKI MO-6900G Series Specifications preview
MO-6900G Series
Brand: JUKI Pages: 4
W6 N 8000 Exklusive Instruction Manual preview
N 8000 Exklusive
Brand: W6 Pages: 176
Tornado KARCHER BD 700 Operating Instructions Manual preview
KARCHER BD 700
Brand: Tornado Pages: 54
Racing MC S6 B Instruction Manual preview
MC S6 B
Brand: Racing Pages: 22
Kärcher PUZZI 50/35 Operating Instructions Manual preview
PUZZI 50/35
Brand: Kärcher Pages: 39
Konica Minolta Minoltafax 1400 User Manual preview
Minoltafax 1400
Brand: Konica Minolta Pages: 157
MULTIQUIP Micasa MVC-70H Operation And Parts Manual preview
Micasa MVC-70H
Brand: MULTIQUIP Pages: 74
Pacific Z20BA Instruction Manual preview
Z20BA
Brand: Pacific Pages: 35
Clarke Vantage 14 Original Instruction preview
Vantage 14
Brand: Clarke Pages: 76
GBC BindMate Instruction Manual preview
BindMate
Brand: GBC Pages: 2
Singer 6-2 Instructions For Timing And Adjusting preview
6-2
Brand: Singer Pages: 18
U.S. Products KING COBRA 1200 PRO Operating Instructions Manual preview
KING COBRA 1200 PRO
Brand: U.S. Products Pages: 12

Brands by name

Popular brands

Load more brands