Baby Lock Solaris VISION BLSA3 Instruction And Reference Manual Download Page 74

Page: 74 / 204

EDITING LETTERS

Touch .

Select the font type.



All the characters in the screen change into the
selected font type.

Scroll the bar to display the font type that is not on
the screen.

Touch .



The new font is selected.

Changing Letter Size

Touch

, and then touch

Touch .

Memo

• To change the character font type for only the

selected character, touch

so that it

appears as

. The font type of the

selected character is changed.

• To select more than one character

individually, touch

. Touch the character

patterns to be selected. To cancel the
selection, touch the character pattern again.

Summary of Contents for Solaris VISION BLSA3













































































































































































































Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands

Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands