manualshive.com logo in svg

Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

The Baby Lock Solaris VISION BLSA3 offers cutting-edge technology and exceptional sewing capabilities. Enhance your sewing experience with our Quick Reference Manual, available for free download at manualshive.com, providing users with easy access to essential information and detailed instructions. Unlock the true potential of your Solaris VISION BLSA3 with this user-friendly manual.

Share
Download
background image

ERROR MESSAGES

199

A

ppe

nd
ix

5

17

Remove the embroidery frame and replace the 
bobbin. OK to move the embroidery carriage to its 
previous position?

This message is displayed when replacing the embroidering bobbin thread. 
(page 52)

18

Remove the embroidery positioning mark.

This message is displayed when the machine has recognized the embroidery 

position mark. Remove the embroidery positioning sticker and touch 

 

to continue. To remove the embroidery positioning sticker more easily, touch 

. (page 47)

19

The bobbin thread is almost empty. 
* Use the “Reinforcement Stitch” button to sew a 
single stitch repeatedly and tie off the stitching.
* Use the move frame key to move the embroidery 
carriage so the embroidery frame can be removed or 
installed. Afterward, the carriage moves back to its 
previous position.

This message is displayed when the bobbin thread is running out. Although a 
few stitches can be sewn when the “Start/Stop” button is pressed, replace 
with a wound bobbin immediately. (page 52)

20

The bobbin winder safety device has activated. Is the 
thread tangled?

This message is displayed when the bobbin is being wound, and the motor 
locks because the thread is tangled, etc.

21

The pattern extends out of the pattern area. Change 
position of the pattern and scan the new area.

This message appears when the built-in camera is being used to align the 
embroidery position, but the embroidery positioning sticker is too near an 
edge or the pattern extends from the embroidery frame.
Change the positioning of the embroidery position sticker, and then try 
aligning the position again. Refer to page 45.

22

The safety device has been activated. Is the thread 
tangled? Is the needle bent?

This message is displayed when the motor locks due to tangled thread or for 
other reasons related to thread delivery.

23

This file cannot be used.

This message appears if the file format is incompatible with this machine. 
Check the list of compatible file formats. Refer to “SPECIFICATIONS” in the 
Instruction and Reference Guide (Sewing).

24

This file exceeds the data capacity and cannot be 
used. Use a suitable size file.

This message is displayed when the file size exceeds the data capacity of the 
machine. Confirm the file size and format. Refer to “SPECIFICATIONS” in the 
Instruction and Reference Guide (Sewing).

25

This key cannot be used at this time.

This message is displayed when you touch [Sewing Guide] in the screen other 
than the utility stitch, or  touch [Pattern Explanation] in the screen other than 
the utility stitch or character/decorative stitch.

26

This USB media cannot be used.

This message is displayed when you try to use incompatible media. For a list 
of compatible USB media, visit “ www.babylock.com ”.

27

Turn off the machine before attaching or removing 
the needle plate.

This message is displayed when the needle plate is removed with the machine 
on or when the machine is turned on and embroidery mode is selected.

28

USB media error

This message is displayed when an error occurs with the USB media. For a 
list of compatible USB media, visit “ www.babylock.com ”.

Error messages

Cause/solution

Summary of Contents for Solaris VISION BLSA3













































































































































































































Reviews:

No comments

Related manuals for Solaris VISION BLSA3

U.S. Products SPOTTER Operating Instructions Manual preview
SPOTTER
Brand: U.S. Products Pages: 12
Janome 1600P PROFESSIONAL - Servicing Manual preview
1600P PROFESSIONAL -
Brand: Janome Pages: 29
Duerkopp Adler 1183i-7 Instructions For Service Manual preview
1183i-7
Brand: Duerkopp Adler Pages: 35
Ultratec IceJet III Operator'S Manual preview
IceJet III
Brand: Ultratec Pages: 7
Alto Clarke Encore L26 Cylindrical Operator'S Manual preview
Clarke Encore L26 Cylindrical
Brand: Alto Pages: 32
Oki OKIFAX 2350 User Manual preview
OKIFAX 2350
Brand: Oki Pages: 87
N&W Global Vending Melodia Classic Installation Operation & Maintenance preview
Melodia Classic
Brand: N&W Global Vending Pages: 68
V-TEK TM-50 Quick Start Manual preview
TM-50
Brand: V-TEK Pages: 4
Nilfisk-Advance All-Purpose Matador Operator'S Manual preview
All-Purpose Matador
Brand: Nilfisk-Advance Pages: 15
Nilfisk-Advance Advolution 20 Instructions For Use Manual preview
Advolution 20
Brand: Nilfisk-Advance Pages: 30
Muratec M-910 Operating Instructions Manual preview
M-910
Brand: Muratec Pages: 52
Hitachi AJ-S70TX User Manual preview
AJ-S70TX
Brand: Hitachi Pages: 48
Goddess WFE1015M8 Instruction Manual preview
WFE1015M8
Brand: Goddess Pages: 24
Nilfisk-Advance Advance BU800 How-To preview
Advance BU800
Brand: Nilfisk-Advance Pages: 2
Panasonic KX-FL513HK Specifications preview
KX-FL513HK
Brand: Panasonic Pages: 2
Panasonic KX-FL541 Service Manual preview
KX-FL541
Brand: Panasonic Pages: 52
Panasonic KX-FL611E Operating Instructions Manual preview
KX-FL611E
Brand: Panasonic Pages: 74
Panasonic KX-FL611BL Operating Instructions Manual preview
KX-FL611BL
Brand: Panasonic Pages: 70

Brands by name

Popular brands

Load more brands