Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

Page: 130 / 204

EMBROIDERY APPLICATIONS
128
b
For this example, since we will embroider
the quilting border according to the on-
screen instructions, select the thumbnail for
the entire quilting border. And then touch
.
a
Touch this key to embroider the quilting border
according to the on-screen instructions. The
number in the lower-left corner indicates the total
number of segments for the quilt border.
b To embroider by visually aligning the pattern
sections, touch each pattern section to be
embroidered.
You can check where and how many times the
part will be embroidered with the codes written on
each key.
C: Corner
V1: The first part of the vertical side
V2: The second part of the vertical side
H1: The first part of the horizontal side
c
Hoop the quilt in the embroidery frame so
that the the marked upper-right corner of
the quilting border is in the embroidering
area, and then attach the embroidery
frame.
d
Align the position for the part in the upper-
right corner.
With selected, move the needle to the inner
corner. Use the move pattern keys to align the inside
upper-right corner of the reference lines previously
drawn on the quilt with the inner corner of the part
projected by the projector.
a
Inner corner
e
Touch to display the embroidery
screen.
f
Press the “Start/Stop” button to embroider
the first part.
a b
Memo
• The needle drop point projected by the
projector can be corrected on the settings
screen. For the procedure, refer to "Needle
Calibration Using the Built-in Camera" in the
machine's Instruction and Reference Guide
(Sewing).
Memo
• If necessary, rotate the pattern so that it is
aligned between the chalk reference lines.
a