Baby Lock Solaris VISION BLSA3 Instruction And Reference Manual Download Page 114

Page: 114 / 204

EMBROIDERY APPLICATIONS

112

Apply a thin layer of fabric glue or a
temporary spray adhesive to the rear of the
appliqué created in step

. Attach the

appliqué to the base fabric matching the
shapes.

Select the satin stitch frame pattern of the
same shape as the appliqué. Embroider over
the appliqué and base fabric from step

create the appliqué.

Using a Frame Pattern to Make
an Appliqué (2)

This is a second method to make appliqué using
embroidery patterns. You do not have to change
the fabric in the embroidery frame using this
method. Embroider one pattern with a straight
stitch and one pattern with a satin stitch.

Select a straight stitch frame pattern, and
embroider the pattern onto the base fabric.

Place the appliqué fabric over the pattern
embroidered in step

Be sure that the appliqué fabric completely covers
the stitching.

Embroider the same pattern on the appliqué
fabric.

Note

• If you change the size or position of the

patterns when selecting them, make a note of
the size and location.

Appliqué material

Summary of Contents for Solaris VISION BLSA3













































































































































































































Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands

Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands