![background image](http://html1.mh-extra.com/html/baby-lock/solaris-vision-blsa3/solaris-vision-blsa3_instruction-and-reference-manual_462506024.webp)
UPPER THREADING
22
f
While holding the thread with both hands,
pull the thread up from under the thread
guide plate.
a
Thread guide plate
g
While holding the thread in your right
hand, pass the thread through the thread
guide in the direction indicated.
h
Guide the thread down, up, then down
through the groove, as shown in the
illustration.
i
Pass the thread through the needle bar
thread guide (marked “6”) by holding the
thread with both hands and guiding it as
shown in the illustration.
a
Needle bar thread guide
j
Pass the thread through the thread guide
disks (marked “7”). Make sure that the
thread passes through the groove in the
thread guide.
a
Groove in thread guide
Note
• When using thread that winds off quickly,
such as metallic thread, place the spool net
over the spool before placing the spool of
thread onto the spool pin.
If the spool net is too long, fold it to fit the size
of the spool.
a
Spool net
b
Thread spool
c
Spool pin
d
Spool cap
* When threading the spool with the spool net
on, make sure that 5-6cm (approx. 2 - 2-1/2
inches) of thread is pulled out.
* It may be necessary to adjust the thread
tension when using the spool net.
a
Memo
• Look in the upper groove area to check if the
thread catches on the thread take-up lever
visible inside the upper groove area.
a
Look in the upper groove area
a
a
Summary of Contents for Solaris VISION BLSA3
