Baby Lock Solaris VISION BLSA3 Instruction And Reference Manual Download Page 80

Page: 80 / 204

EDITING COLORS

[Manual] setting for [Gradient]

You can select one color to be used in the
[Gradient] effect.
The effect will be created with a color you select.

Select a color from the palette.

Selected color is displayed.

Touch .

Touch the desired color scheme from
samples.

Touch

to display the new schemes.

Touch

to temporarily register your favorite

schemes. A maximum of nine color schemes can
be registered as favorites. To release a favorite

color scheme, touch

again.

Touch

to display the color scheme

favorites screen. Touch

to remove the color

scheme on color scheme favorites screen.

Touch to review the previous schemes.

Touch

to select the displayed color

scheme.

Touch

to return to the previous screen.

You can continue selecting color schemes from the

selected page prior to touching

Touch

to display the other color

schemes.



The thread color palette screen will appear.

Memo

• Maximum 20 pages of schemes can be

reviewed.

Summary of Contents for Solaris VISION BLSA3













































































































































































































Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands

Baby Lock Solaris VISION BLSA3, Instruction And Reference Manual

Search results

Summary of Contents for Solaris VISION BLSA3

Reviews:

Related manuals for Solaris VISION BLSA3

Brands by name

Popular brands