![background image](http://html1.mh-extra.com/html/baby-lock/solaris-vision-blsa3/solaris-vision-blsa3_instruction-and-reference-manual_462506166.webp)
IQ DESIGNER WITH SCAN
164
Create the pattern using scanned
images or image data files
In addition to using built-in shapes and drawing
tools, you can create patterns using scanned
images of fabric, line drawings, illustrations, and
data files of images.
a
Touch this key to use the image as a background
image. (page 165)
b
Touch this key to convert a line drawing to
embroidery data. (page 169)
c
Touch this key to convert an illustration to
embroidery data. (page 172)
Using the Scanning Frame
a
Prepare the desired drawing/illustration.
b
Place the paper to be scanned in the
scanning frame, and then secure the paper
in place with the magnets.
*
Place the magnets at six locations around the paper
to secure it, making sure that the line drawing is not
covered.
IQ DESIGNER WITH SCAN
IMPORTANT
• If, during scanning, the embroidery foot comes
into contact with the material to be scanned
(illustration, etc.), the material to be scanned
or embroidery foot may be damaged. Do not
scan materials that may come into contact
with the embroidery foot, such as thick
materials or materials with wrinkles or
creases.
Memo
• Only one sheet of paper can be placed in the
scanning frame per scan.
a
b
c
Note
• When placing the paper in the scanning
frame, make sure that the white balance area
is not hidden; otherwise, the drawing cannot
be scanned correctly. At the same time, be
sure to place the scan image within the scan
area. The image out of the scan area will not
be scanned.
a
White balance area
b
Scan area
• Make sure that the white balance area or the
scan area is not dirty or scratched; otherwise,
the image cannot be scanned correctly.
• Be sure to use the magnets which are
included with the scanning frame. If any other
magnets are used, they may become
attached to the machine during scanning, or
other problems, such as a misaligned scan
image, may occur.
• Be sure to place the magnets so that they
secure the paper firmly. If the paper is placed
unevenly, the image cannot be scanned
correctly.
• If the scanning frame is dirty, gently wipe it
with a soft cloth that has been soaked in
lukewarm water then firmly wrung.
a
b
Summary of Contents for Solaris VISION BLSA3
