YASKAWA CIPR-GA50C series, Техническое руководство

Страница: 743 / 766

Parameter
Details
12
12.11 o: Keypad-Related Settings
YASKAWA SIEPC71061753A GA500 Technical Manual 743
■
o4-07: Softcharge Relay Maintenance Set
No.
(Hex.)
Name Description
Default
(Range)
o4-07
(0523)
Softcharge Relay
Maintenance Set
Sets the U4-06 [PreChargeRelayMainte] monitor value.
0%
(0 - 150%)
When you replace a drive, set o4-07 = 0 to reset U4-06 . When the o4-07 setting changes, the count of U4-06
starts again as specified by the setting of o4-07 . After you complete the configuration, o4-07 automatically resets
to 0 .
Note:
The maintenance period changes for different operating environments.
■
o4-09: IGBT Maintenance Setting
No.
(Hex.)
Name Description
Default
(Range)
o4-09
(0525)
IGBT Maintenance Setting
Sets the U4-07 [IGBT Maintenance] monitor value.
0%
(0 - 150%)
When you replace a drive, set o4-09 = 0 to reset U4-07 . When the o4-09 setting changes, the count of U4-07
starts again as specified by the setting of o4-09 . After you complete the configuration, o4-09 automatically resets
to 0 .
Note:
The maintenance period changes for different operating environments.
■
o4-11: Fault Trace/History Init (U2/U3)
No.
(Hex.)
Name Description
Default
(Range)
o4-11
(0510)
Fault Trace/History Init
(U2/U3)
Resets the records of Monitors U2-xx [Fault Trace] and U3-xx [Fault History] .
0
(0, 1)
Note:
When you initialize the drive with
A1-03 [Initialize Parameters]
, the drive will not reset the records for
U2-xx
and
U3-xx
.
0 : Disabled
Keeps the records of Monitors U2-xx and U3-xx .
1 : Enabled
Resets the records for Monitors U2-xx and U3-xx . After the reset, the drive automatically resets o4-11 to 0 .
■
o4-12: kWh Monitor Initialization
No.
(Hex.)
Name Description
Default
(Range)
o4-12
(0512)
kWh Monitor Initialization
Resets the monitor values for U4-10 [kWh, Lower 4 Digits] and U4-11 [kWh, Upper 5 Digits] .
0
(0, 1)
Note:
When you initialize the drive with A1-03 [Initialize Parameters] , the drive will not reset U4-10 and U4-11 .
0 : No Reset
Keeps the monitor values for U4-10 and U4-11 .
1 : Reset
Resets the values of U4-10 and U4-11 . After the reset, the drive automatically resets o4-12 to 0 .
■
o4-13: RUN Command Counter @ Initialize
No.
(Hex.)
Name Description
Default
(Range)
o4-13
(0528)
RUN Command Counter @
Initialize
Resets the monitor values for U4-02 [Num of Run Commands] , U4-24 [Number of Runs (Low)] ,
and U4-25 [Number of Runs (High)] .
0
(0, 1)
0 : No Reset
Keeps the monitor values for U4-02 , U4-24, and U4-25 .
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV