Yamaha WR426F(N), Руководство по эксплуатации для владельца

Страница: 218 / 762

2 - 38
SPEC
CABLE ROUTING DIAGRAM
EC240000
CABLE ROUTING DIAGRAM
1 Hose guide
2 Brake hose
3 Regulator
4 Fuel tank breather hose
5 Oil tank breather hose
6 Clamp
7 “ENGINE STOP” button lead
8 Sub wire harness
9 Tail light lead
0 TPS (throttle position sensor) lead
A Neutral switch lead
B Oil hose
C Cylinder head breather hose
D CDI magneto lead
E Hose holder
F Clutch cable
G Decompression cable
H Lights switch lead
I Carburetor breather hose
J
Overflow hose
K Coolant reservoir tank breather hose
Å
Pass the fuel tank breather
hose behind handlebar, then
insert it into the steering shaft
hole.
ı
Pass the decompression
cable, “ENGINE STOP” but-
ton lead and lights switch lead
under where the oil hose is
attached.
Ç
Fasten the CDI magneto lead,
neutral switch lead “ENGINE
STOP” button lead and lights
switch lead to the frame with a
plastic locking tie.
Î
Pass the “ENGINE STOP” but-
ton lead and lights switch lead
along the inner side of the oil
tank breather hose.
‰
Fasten the sub wire harness,
“ENGINE STOP” button lead
and lights switch lead to the
frame in front of the protector
of the sub wire harness with a
plastic locking tie and cut off
the tie end.
Ï
Pass the cylinder head
breather hose along the right
side of the oil tank breather
hose.
Ì
Fasten the sub wire harness
and “ENGINE STOP” button
lead to the frame with a plas-
tic locking tie and cut off the
tie end.
Ó
Pass the sub wire harness
between the engine brackets.