Yamaha WR426F(N), Руководство по эксплуатации для владельца

Страница: 644 / 762

5 - 50
CHAS
4. Install:
●
Plain washer 1
●
Ring nut 2
Tighten the ring nut using the ring nut
wrench
3 .
Refer to “STEERING HEAD INSPEC-
TION AND ADJUSTMENT” section in
the CHAPTER 3.
T
R .
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
5. Check the steering shaft by turning it lock
to lock. If there is any binding, remove
the steering shaft assembly and inspect
the steering bearings.
6. Install:
●
Plain washer 1
7. Install:
●
Front fork 1
●
Handle crown 2
NOTE:
●
Temporarily tighten the pinch bolts (under
bracket).
●
Do not tighten the pinch bolts (handle crown)
yet.
8. Install:
●
Plain washer 1
●
Steering shaft nut 2
T
R .
.
145 Nm (14.5 m · kg, 105 ft · lb)
STEERING