Yamaha WR426F(N), Руководство по эксплуатации для владельца

Страница: 530 / 762

4 - 98
ENG
EC4N5000
ASSEMBLY AND INSTALLATION
Crankshaft bearing
1. Install:
●
Bearing
●
Bearing stopper
●
Screw (bearing stopper)
●
Screw [bearing stopper (crankshaft)] 1
To crankcase (left and right).
NOTE:
●
Install the bearing by pressing its outer race
parallel.
●
To prevent the screw [bearing stopper
(crankshaft)] from becoming loose, crush the
screw head periphery
a
into the concave
b
using a punch etc. In so doing, take care not
to damage the screwdriver receiving hole in
the screw head.
Crankshaft
1. Install:
●
Crankshaft
1
Use the crankshaft installing tool 2 , 3 ,
4 , 5 .
Å
For USA and CDN
ı
Except for USA and CDN
NOTE:
●
Hold the connecting rod at top dead center
with one hand while turning the nut of the
installing tool with the other. Operate the
installing tool until the crankshaft bottoms
against the bearing.
●
Before installing the crankshaft, clean the
contacting surface of crankcase.
CAUTION:
Do not use a hammer to drive in the crank-
shaft.
Crankshaft installing tool:
Pot 2 :
YU-90050/90890-01274
Bolt 3 :
YU-90050/90890-01275
Adapter 4 :
YM-1277/90890-01277
Spacer 5 :
YM-91044/90890-04081
New
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
1
a
b
T
R .
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
Å
ı
CRANKCASE AND CRANKSHAFT