Toshiba Estia RUA-CP1701H, Руководство по обслуживанию

Страница: 13 / 164

Monobloc Outdoor Unit Service Manual
12
Full Load Performance* RUA-CP1701H RUA-CP2101H
Nominal heating capacity (EWT 30°C / LWT 35°C & OAT 7°C) ~
kW
H1 17.1 21.1
COP ~ W/W H1 4.1 4.1
Eurovent class heating H1 A A
Nominal heating capacity (EWT 40°C / LWT 45°C & OAT 7°C) ~
kW
H2 16.2 20.0
COP ~ W/W H2 3.4 3.3
Eurovent class heating H2 A A
Nominal heating capacity (EWT 50°C / LWT 55°C & OAT 7°C) ~
kW
H3 15.3 19.1
COP ~ W/W H3 2.7 2.7
Heating Leaving water temperature range (min ~ max) °C 20 ~ 60 20 ~ 57
Nominal cooling capacity (EWT 12°C / LWT 7°C & OAT 35°C) ~
kW
C1 14.9 18.6
EER ~ W/W C1 3.0 3.1
Eurovent class cooling C1 B A
Nominal cooling capacity (EWT 23°C / LWT 18°C & OAT 35°C) ~
kW
C2 19.8 25.8
EER ~ W/W C2 3.9 3.8
Eurovent class cooling C2 A A
Cooling Leaving water temperature range (min ~ max) °C 5 ~ 18 5 ~ 18
Notes:
* = in accordance with EN14511-3:2013
C1 = cooling mode conditions: evaporator water entering/leaving temperature 12°C/7°C, outside air temperature 35°C
C2= cooling mode conditions: evaporator water entering/leaving temperature 23°C/18°C, outside air temperature 35°C
H1= heating mode conditions: water heat exchanger entering/leaving temperature 30°C/35°C. Outside air temperature
7°CDB/6°CWB
H2= heating mode conditions: water heat exchanger entering/leaving temperature 40°C/45°C. Outside air temperature
7°CDB/6°CWB
H3= heating mode conditions: water heat exchanger entering/leaving temperature 47°C/55°C. Outside air temperature
7°CDB/6°CWB
(1) Values are guidelines only. Refer to unit nameplate
(2) In dB ref=10-12W, (A) weighting. Declared dual number noise emission values in accordance with ISO 4871
(3) In dB ref 20
μPa, (A) weighting. Declared dual number noise emission values in accordance with
ISO 4871
(4) Minimum water-side operating pressure with fixed speed pump is 50kPa and with variable speed pump is 40kPa
Electrical data
RUA-CP****H* – Full Options RUA-CP1701H RUA-CP2101H
Power circuit
Nominal power supply ~ V/ph/Hz 400 / 3+N / 50
Voltage range ~ V 360 - 440
Control circuit supply 24V AC internal transformer
Nominal current at nominal voltage (Un)
1
~ (A) 12.5 14.3
Maximum power input at nominal voltage (Un)
2
~ kW 10.8 12.4
Power factor at maximum power
2
~
Φ
0.93
Maximum current at nominal voltage – 10% (Un-10%)
3
~ A 18.5 21.2
Maximum unit current (Un)
4
~ A 16.7 19.1
Maximum start up current – standard unit
5
~ A
Not applicable
(less than the operating current)
Note:
1 = Conditions equivalent to the standardised Eurovent conditions (evaporator water entering-leaving temperature = 12 °C/7 °C,
outside air temperature = 35 °C)
2 = Power input, compressors and fans, at the unit operating limits (saturated suction temperature 15 °C, saturated condensing
temperature 68.3 °C) and nominal voltage of 400 V (data given on the unit nameplate)
3 = Maximum unit operating current at maximum unit power input and at 360 V
4 = Maximum unit operating current at maximum unit power input and at 400 V (values given on the unit nameplate)
5 = Maximum instantaneous start-up current at operating limits (maximum operating current of the smallest compressor(s) + fan
c locked rotor current of the largest compressor).