Toshiba Estia RUA-CP1701H, Руководство по обслуживанию

Страница: 110 / 164

Monobloc Outdoor Unit Service Manual
109
10.1.3.3. Capacity Table
Access type: Read-only (force is possible)
TABLE NAME: LOADFACT, PIC Table Type: 11H, instance 3
PAR. NAME RANGE DEFAULT UNIT DESCRIPTION
61 cmp_req 0 to 5/21/22 0 - Compressor Mode Request
1
62 cmp_inv 0 to 2/7/21/22 0 - Compr. Mode sent to Inv.
2
63 cmp_stat 0 to 2/7/21/22 0 - Compressor Mode Status
2
64 cap_ovr xxx N.A. - Capacity Override
3
65 cap_tmr xxx 0 s Capacity Timer
66 CAP_T 0 to 100 N.A. % Total Capacity
4
67 DEM_LIM 0 to 100 100 % Demand Limit
5
68 FREQ_RED No / Yes No - Frequency Reduction Mode
6
69 RUNNING No / Yes No - Unit Running Status
7
1. Compressor mode request
0 = Off
1 = Cool
2 = Heat
5 = Booster cooling
6 = Booster heating
7 = Defrost
21 = Cool satisfied
22 = Heat satisfied
2. Compressor mode sent
0 = Off
1 = Cool
2 = Heat
7 = Defrost
21 = Cool satisfied
22 = Heat satisfied
3. Capacity override
0 = No override
1 = Power Up Delay
2 = Compressor Minimum On time (timeguard)
3 = Compressor Minimum Off time (timeguard)
4 = Mode Change Delay
5 = Compressor Starting Sequence Step 1
6 = Compressor Starting Sequence Step 2
7 = Compressor Starting Sequence Step 3
8 = Compressor Starting Sequence Step 4
9 = Compressor Stopping Delay
10 = Null Demand Limit
11 = Frequency Reduction active
20 = Defrost
21 = reserved
39 = Minimum OAT for Heating
40 = Maximum OAT for Heating
41 = Maximum EWT in Heating
42 = Low OAT in Heating
43 = Very Low OAT in Heating
44 = High OAT in Heating
45 = High LWT in Heating
46 = reserved
47 = High LWT in Heating
50 = Minimum OAT for Cooling
51 = Minimum EWT for Cooling
52 = OAT below 15°C in Cooling
53 = OAT above 26°C in Cooling
54 = OAT above 40°C in Cooling
55 = Low SST Avoidance
56 = reserved
57 = reserved
58 = Water Exchanger Freeze Protection in Cooling
61 = Negative OAT and LWT above 12°C in cooling
62 = Negative OAT in cooling
70 = Water Flow Protection
80 = Oil Return Protection
85 = Compressor Stop Request by Inverter
90 = Booster Cooling
91 = Booster Heating
100 = System Alarm
101 = Compressor or Inverter Alarm
102 = Configuration Error (Factory)
201 = Rating Cool
202 = Rating Heat
203 = Rating Ramp Cool
204 = Rating Ramp Heat
4. Total capacity (read-only)
The total capacity is computed according to the real compressor
frequency returned by the Inverter and the current minimum and
maximum configured frequencies.
5. Demand limit
If the Frequency Reduction Mode is active, this parameter will
take into account
Power Limitation value [powr_lim] [P541]
Please note that when the unit is operating in the
Header/Follower assembly, then this parameter can be forced
only by the Header.
6. Frequency reduction mode
No = No frequency reduction
Yes = Frequency is limited to
Power Limitation value [powr_lim]
of the maximum allowed frequency [P541].
"Frequency reduction mode" can be activated by the Frequency
Reduction switch, written by a Comfort Module or forced in this
table.
7. Running status (read-only)
No = Unit is currently stopped
Yes = Unit is running