Toshiba Estia RUA-CP1701H, Руководство по обслуживанию

Страница: 98 / 164

Monobloc Outdoor Unit Service Manual
97
10.1.1.
Service tables
10.1.1.1. Factory Table
Access type: Read/Write
TABLE NAME: FACTORY, PIC Table Type: 13H, instance 1
PAR. NAME RANGE DEFAULT UNIT DESCRIPTION
801 unittype 0 to 3 2 - Unit Type
1
802 unitsize 0 to 40 0 - Unit Size
2
803 fan_type 0 to 1 0 - Fan Type
3
804 pmp_type 0 to 2 0 - Water Pump Type
4
805 flw_type 0 to 2 1 - Flow Switch Type
5
806 flw_chkt 5 to 120 15 s Delay before Flow Check
6
807 unitmont 0 to 1 0 - Unit Mounting Type
7
808 supply 0 to 1 1 - Power Supply Type
8
809 heatoptz No / Yes No - Heating Optimized select
9
810 country 0 to 999 33 - Country Code
10
811 oem_code 0 to xxx 0 - OEM Code
812 qm_code 0 to 65535 0 - Special Requirement Code
813 fac_pass 0 to 9999 410 - Factory Password
814 clht_typ 0 to 1 1 - Cooler Heater Type
11
1. Unit type
0 = Undefined
1 = Cooling Only
2 = Cooling and Heating
3 = Heating Only
2. Unit size
0 = Undefined
17 = 17 kW
21 = 21 kW
3. Fan type
0 = Regular fan
1 = Ducted fan
4. Water Pump Type
0 = No internal pump
1 = Hydronic Kit with Fixed Speed Pump
2 = Hydronic Kit with Variable Speed Pump
(PWM control)
5. Flow switch type
0 = No Flow Switch
1 = Normally Open Flow Switch (Flow Switch closed
when water is flowing)
2 = Normally Closed Flow Switch (Flow Switch open
when water is flowing) 6. Delay before check
The water pump is started. The water flow is checked
after the pre-set delay.
7. Unit mounting type
0 = Monobloc
1 = Split unit
8. Supply type
0 = 230 VAC single phase
1 = 400 VAC three phases with neutral
9. Heating optimized select
This parameter is currently not applicable (Reserved for
Future Use).
10. Country code
The country code corresponds to country calling codes,
e.g. 0 = undefined, 33 = France, 34 = Spain, etc.
11. Cooler heater type
0 = No cooler heater
1 = Electric cooler heater on the water exchanger
⚠
Please note that the main control board is rebooted 10 seconds after updating the FACTORY table