Toshiba Estia RUA-CP1701H, Руководство по обслуживанию

Страница: 121 / 164

Monobloc Outdoor Unit Service Manual
120
10.1.5. Setpoint tables
Setpoint tables provide information on temperatures to be achieved, including the reset adjustment.
10.1.5.1. Water Setpoint Table
Access type: Read/Write
TABLE NAME: WAT_STP, PIC Table Type: 17H, instance 1
PAR. NAME RANGE DEFAULT UNIT DESCRIPTION
401 hwoccstp 20.0 to 60.0 45.0 °C Heat Home Setpoint
1
402 hwunooff -10.0 to 0.0 0.0 ^C Heat Sleep Offset
3
403 hwecooff -10.0 to 0.0 -5.0 ^C Heat Away Offset
4
404 dhwecstp 20.0 to 60.0 45.0 °C DHW Eco Setpoint
405 leg_stp 50.0 to 60.0 60.0 °C DHW Anti-Legionella Stp
406 dhw_stp 30.0 to 60.0 50.0 °C DHW Setpoint
407 cwoccstp 0.0 to 18.0 12.0 °C Cool Home Setpoint
2
408 cwunooff 0.0 to 10.0 0.0 ^C Cool Sleep Offset
3
409 cwecooff 0.0 to 10.0 0.0 ^C Cool Away Offset
4
410 hw_hyst 0.5 to 2.0 1.0 ^C Heat Hysteresis
411 cw_hyst 0.5 to 2.0 0.5 ^C Cool Hysteresis
5
412 hcurvoff -5.0 to 5.0 0.0 ^C Heat Curv Max Stp Offset
413 ccurvoff -5.0 to 5.0 0.0 ^C Cool Curv Min Stp Offset
1. Heating water setpoints
These setpoints are used when Heating Climatic Curve
Select [ht_curv] is set to "-1" (Par.581 in CLIMCURV).
2. Cooling water setpoints
These setpoints are used when Cooling Climatic Curve
Select [cl_curv] is set to "-1" ([P586] in CLIMCURV). 3. Sleep offset
The offset applied to the Home Setpoint.
4. Away offset
The offset applied to the Home Setpoint.
5. Hysteresis
The minimum threshold to switch off the compressor is
limited to
MinimumCoolingSetpoint - 0.5 K (even if
CRTL_PNT is minimum and hysteresis is configured to 2
K).