Sony SRW-5000, Руководство по обслуживанию, Страница: 183 / 438

3-89
SRW-5000/5500
EXIT
HDCAM-SR FORMAT RF ADJUST
Cancel the adjustment ?
[F10] : No
[SFT]
+ [F10] : Yes
RF ADJUST NVRAM
CTL
FMT
SEL
NG
LIST
DIAG
F1
F2
F3
F4
ALT F5 F6 F7 F8 F9 F10
To cancel the automatic adjustment halfway:
(1) Press the
[F10]
(EXIT) key.
The message “Cancel the adjustment ?” is displayed.
(2) Press the
[F10]
(EXIT) key while pressing the
[SFT]
(SHIFT) key, and then press the
[F10]
(EXIT) key again to return to the RF ALL ADJUST menu.
To continue the adjustment, press the
[F10]
(EXIT) key only.
5. Perform steps 8 and 9 to save the adjusted data, then eject the alignment tape.
When the HDCAM SR format is selected, perform the following steps 6 to 10.
6. Insert a recordable cassette tape.
.
To cancel the adjustment, press the
[F10]
(EXIT) key twice to return to the RF ALL ADJUST
menu.
n
Pay attention to the transport start position of the tape so that the end and beginning of the tape are
not detected during adjustment. If the cassette is forcibly ejected during the automatic adjustment, the
adjustment is cancelled, its result is detected, and the display returns to the initial window. The
minimum tape amount required for a normal automatic adjustment is shown in the following table:
however, the tape amount increases or decreases if the adjustment is abnormal.
Menu Upper level: Normal adjustment time
Lower level: Tape amount required (Transport mode)
REC ADJUST About 10 seconds/ALL
Adjustment time (REC)