Sony SRW-5000, Руководство по обслуживанию, Страница: 149 / 438

3-55
SRW-5000/5500
DIAG
F1
F2
F3
F4
ALT F5 F6 F7 F8 F9 F10
EXIT
NVRAM CONTROL
NO OPERATION
SAVE ALL DATA
ALL DATA PREVIOUS
RESET ALL DATA
OTHERS CHECK
2. Select data to be changed, using cursor key.
3. Enter data in hexadecimal, using numeric keys.
.
To enter the values A to F, press the numeric keys 0
to 5 while pressing the
[SFT]
(SHIFT) key respec-
tively.
.
The changed value is displayed in yellow.
4. Press the
[F1]
(NVRAM CTL) key.
5. Select “SAVE ALL DATA” using
[(]
/
[)]
key, and
press the
[F10]
(EXIT) key.
.
The changed data is written on the NV-RAM, and
the menu returns to the PARA-I SETUP/PARA-O
SETUP menu.
When the changed data is not to be stored, select “NO
OPERATION”, and press the
[F10]
(EXIT) key.
.
The menu returns to the PARA-I SETUP/PARA-O
SETUP menu, and the changed value remains in
yellow.
To return data to the previous values, select “ALL
DATA PREVIOUS”, and press the
[F10]
(EXIT) key.
.
The menu returns to the PARA-I SETUP/PARA-O
SETUP menu.
To return NV-RAM to the factory-setting data, select
“ALL DATA PREVIOUS”, and press the
[F10]
(EXIT) key.
6. Press the
[F10]
(EXIT) key to return to the OTHERS
CHECK menu.
DIAG
F1
F2
F3
F4
ALT F5 F6 F7 F8 F9 F10
EXIT
PARALLEL I/O DATA CONTROL
NO OPERATION
LOAD FROM CARD
SAVE TO CARD
OTHERS CHECK
How to Save to/Read from Memory Stick (or
Memory Card)
n
The both input and output-pin setting data are saved/read.
1. In the PARA-I SETUP/PARA-O SETUP menu, press
the
[F5]
(MEMORY CARD) key to display the
PARALLEL I/O DATA CONTROL menu.
2. To save data into the Memory Stick (or memory card),
select “SAVE TO CARD”, and press the
[F10]
(EXIT) key.
To read data from the Memory Stick (or a memory
card), select “LOAD FROM CARD”, and press the
[F10]
(EXIT) key.
3. Press the
[F10]
(EXIT) key to return to the OTHERS
CHECK menu.
n
The input/output settings of the 50-pin parallel remote
connector are saved or read at a time, regardless whether
PARA-I SETUP or PARA-O SETUP is made.