Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 478 / 573

Appendix A
Data Conversion
469
Conventional models: A window/keyboard screen can be specified at any
desired position.
Conversion result, error message and corrective action
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
With a conventional
model, a range that
does not fit the
touch switch size is
specified as the dis-
play range. With a new model,
the range is cor-
rected so that it
agrees with the
touch switch posi-
tions. Some screen ele-
ments exceed
frame size. The ele-
ments will not be
downloaded to PT
Hardware. If the position and the
range of the window to
be displayed is inconve-
nient for operation, cor-
rect the position and the
range. (Refer to 5-4
Window/Keyboard
Screens.)
Correction related to the system initializing screen (Host Connect screen)
When the system initializing screen is converted, conversion is executed as
shown below due to differences in screen numbers and elements that can be
registered between conventional and new models.
Difference
New models: Screen No. 9000
Only fixed display elements (excluding image data
and library data) can be registered.
Conventional models: Screen No. 1999
All kinds of element can be registered.
Some elements that need communications with a
host may not be displayed correctly.
Conversion result, error message and corrective action
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
With a conventional
model, elements
that cannot be reg-
istered on a new
model are regis-
tered. With a new model,
the screen No. is
modified to 9000.
Elements that can-
not be registered for
a new model are re-
moved. This screen does
not support XXX. It
is discarded. Correct the screen so
that the same screen as
before the conversion is
created using fixed dis-
play elements excluding
image/library data. (Re-
fer to 5-8. Host Connect
Screen (System Initializ-
ing Screen))
Correction related to extended screens
When an extended screen is converted, an error message may be displayed due
to differences in the handling of an extended screen between conventional and
new models.
Difference
New models: Extended screens are not supported.
Conventional models: Extended screens can be used as standard screens.
Conversion result, error message and corrective action
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
With a conventional
model, the screen
number of an ex-
tended screen is
used for a standard
screen. With a new model,
the screen is
treated as a stan-
dard screen. The screen no. XXX
was an Extended
Screen that is not
supported by this
model, so it is con-
verted to a standard
screen. ––