Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 496 / 573

Appendix B
System Installer Operation
488
Extension PT Model
.20 NT20 (System)
.20M NT20 (Extended)
.21 NT21
.31 NT31
.31C NT31C
.31G NT31-V3
.31D NT31C-V3
.631 NT631
.63C NT631C
.63D NT631C-V3
.11S NT11S
.11 NT11
30 NT30
30C NT30C
62S NT620S
62C NT620C/NT625C
Specifying the System and Extension
These selection items will be displayed if the NT20 is selected for the PT mod-
el.
For the NT20, the system program will be divided into the following two items:
System: Program itself
Extension: Resource data for each display language
Select which of the two will be transferred.
:
The system program is installed when this button is clicked.
Installing the System Program
The procedure for installing the system program is shown below.
(1) Specify the PT model for which the system program is installed for [PT Mod-
el] in the main window.
(2) Specify the system program to be installed by setting the information at
[Drive], [Look in], and [System File(s)] in the main window.
(3) Specify the RS-232C port used for the communications with the PT for [Com
Port].
(4) Make the PT ready for installation of the system program.
The operation required at the PT varies depending on the PT model. Basi-
cally, execute the processing for deleting the system program, then that for
setting the PT in the state in which it waits for the reception of the system
program. For details, refer to the manual for your PT.
(5) Click on in the main window.