Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 255 / 573

6-9 Section Graphs
242
Touch switches for logging
Next Page:
(Forward) Specify whether or not a touch switch used to
move the display range in the direction of newer
records is used.
Previous Page:
(Rewind) Specify whether or not a touch switch used to
move the display range in the direction of older
records is used.
Log Clear:
(Clear log) Specify whether or not a touch switch used to
clear all logged data is used.
Touch switches for display function
Restart :
(Continue) Specify whether or not a touch switch used to restart
the halted data sampling is used.
Stop: Specify whether or not a touch switch used to halt
data sampling is used.
Display Clear:
(Clear display) Specify whether or not a touch switch used to clear
the graph display is used. Note that the log data is
not cleared by this switch.
Line
Value
Table Entry: Specify the table entry number of the numeral memory table
entry whose contents are displayed in a trend graph.
Display %: Specify whether or not a percentage value is displayed on
the screen.
Line
Color: Specify the graph (line) color.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Style: Specify the line type.
Solid, Dash, Dot-dash, Dot-dot-dash
100%
Table Entry: Specify this item if a 100% value is set with a numeral memory
table entry: set the table entry number of the numeral memory
table.
Value: Specify this item if a 100% value is set with a constant:
set the value to be taken as the 100% value.
0%
Table Entry: Specify this item if a 0% value is set with a numeral memory
table entry: set the table entry number of the numeral memory
table.
Value: Specify this item if a 0% value is set with a constant:
set the value to be taken as the 0% value.
–100%
Table Entry: Specify this item if a –100% value is set with a numeral memory
table entry: set the table entry number of the numeral memory
table.
Value: Specify this item if a –100% value is set with a constant: set the
value to be taken as the –100% value.