Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 352 / 573

8-2 Section Library Editor
340
(1) Click the mouse on the dotted lines of the library data specifying frame.
Green (handles) are displayed enclosing the library data specifying
frame.
(2) The size can be changed by dragging a handle.
Position the mouse cursor on a green handle: the shape of the mouse cursor
changes as shown below. Drag the mouse cursor in the indicated direction
to change the size of the library data specifying frame.
Up-down handle Right-left handle Apex handle
(3) The library data specifying frame can be moved by dragging the frame at
positions other than handles.
When handles are displayed, position the mouse cursor on the dotted line at
a position where there is no handle: the shape of mouse cursor changes as
shown below. Drag the mouse. The frame moves as it is dragged.
(4) After changing the size and the position of the library data specifying frame,
click on the screen at a position other than on the frame.
The size and the position of the library data specifying frame is determined
and the handles are cleared.
To change the size and the position of the library data specifying frame, re-
peat the procedure above from step (1).
Setting grids
To set a grid on the library editor screen, select [Screen] (menu bar) and [Grid].
The necessary settings for displaying grids are same as those for a standard
screen. For details, refer to 5-1-2 Grid Setting.
Quitting the library editor
You can quit the library editor in any of the three ways described below.
Clicking the Button at the upper right area of the library editor.
Selecting [Close] from the control menu box of the library editor.