Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 115 / 573

5-14 Section Contrast and Brightness Adjustment
102
PT Screen No.
NT11S/NT11, NT20, NT20S, NT600S,
NT30, NT30C, NT620S, NT620C, NT625C None
NT21, NT31, NT31C, NT631, NT631C 9020
Reference: The Programming Console Screen is supported only by the NT21, NT31,
NT31C, NT631, and NT631C.
5-13 Device Monitor Screen
These are system-defined screens and cannot be created or viewed in NTST.
Application manager will not list out these screens. Screens available are:
Screen No. DAC Function Name NT31/631/31C/631C-V
2 Function Name
9021 I/O Monitor Registration Monitor
9022 DM Monitor Continuous Monitor
9023 Error Monitor Error Log
Reference: These screen numbers can be referred by the following functions:
(1) Touch switch Switch screen
(2) Bit memory table Switch screen function
(3) Bit memory table Alarm function
These screens can only be view on PT if the communication method is NT link. If
communication method is host link, it would not be possible to switch to these
screens.
5-14 Contrast and Brightness Adjustment
This is a system-defined screen and cannot be created or viewed on NTST. The
application manager will not list this screen. Contrast and Brightness Adjustment
is used for tuning the contrast and brightness of the PT screen without the need
to disconnect from the PLC.
The screen number designated is 9030.
PT models that support this requirement are as follows:
NT31-V2 (System Ver3.1),
NT31C-V2 (System Ver3.1),
NT631C-V2 (System Ver3.1). (NT631C-ST141
only)
This screen can be accessed using the following functions:
(1) Touch switch – Switch screen
(2) Bit memory table – Switch screen function
(3) Bit memory table – Alarm function