Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 460 / 573

12-2 Section Printing Reports
450
Size: Set the size of paper to be used.
Source: Set the paper tray to be used.
Orientation: Set the direction of printing paper.
Portrait: Specify this item if the data is to be printed parallel to the short-
er dimension of the paper.
Landscape: Specify this item if the data is to be printed parallel to the longer
dimension of the paper.
[Properties]: Used to set the printer properties.
Since the setting differs according to the printer, refer to the manual of the printer
driver.
Reference: If the print setup, print, or print preview has been executed under condition that
no printer driver has been installed, there may be times Support Tool does not
move correctly.
12-2-2 Output to a Printer
To output the report to the printer, follow the procedure shown below.
(1) Select [File] (menu bar)
→
[Print].
The Reports dialog box is displayed. (page 451)
(2) Set “Printer” for [Destination].
(3) To specify the printing position of the paper, click on [Set Margins ..] button.
The Set Margins dialog box is displayed.
After setting the items in this dialog box, click on . The Reports
dialog box is displayed again.
(4) To set the header/footer, click on the [Header/Footer] button.
The Header and Footer dialog box is displayed.
After setting the items in this dialog box, click on . The Reports
dialog box is displayed again.
(5) After completing the setting, click on in the Reports dialog box.
The Print dialog box is displayed. (page 455)
Set the print range and the number of copies.