Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 70 / 573

3-3 Section Operation of Screen Data (Application) File
56
even if it has been download to PT. Downloading will be possible; however, the
data may not be used with DOS version Support Tool correctly.
ST
Windows version Support Tool
DOS version Support Tool
Upper
compatibility
NT20, NT20S, NT30,
NT30C, NT620S,
NT620C/NT625C
PT
With mmi file format, error check is executed before saving. By this error check,
data that cannot be downloaded to PT will not be stored.
With the Support Tool on CD-ROM, the NT Transfer Utility, which transmits
mmi file to the PT, is supplied. For details, refer to Appendix C NT Transfer Util-
ity.
3-3-4 Closing the Screen Data (Application) File
It is not possible to open two or more screen data files with one Support Tool. So
when you want to edit different screen data file, you need to close the currently
opened file, or start up the second Support Tool using the [Import Component]
command from the [File] menu. For details of Import Component, refer to 3-3-6
Importing Components from Different Screen Data File (Starting Up the Second
Support Tool).
To close application, select [Close] from [File] in the main window menu.
If the screen data (application) has not been saved, a message requesting con-
firmation of saving it is indicated/displayed.
If the file name is not set, the name setting dialog appears. If
the file name has been already determined, the data will be
overwritten.
The screen data file closes without saving the screen data.
The file close operation is canceled.
3-3-5 Importing (Reading) the DOS Version Screen Data (Application)
File
The Support Tool has a function for reading screen data files created using the
previous DOS version Support Tool. Note that although the DOS version screen
data files can be read, files cannot be saved in DOS format.