Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 337 / 573

8-1 Section Image Editor
325
(4) Select [Paste].
[Paste] can not be selected if the image data to be pasted is not stored in the clip-
board. After clicking the
Button in confirmation dialog box, image data
will be pasted to the selected code.
Quitting the image table
You can quit the image table in any of the two ways described below.
Clicking the Button of the image table dialog.
Clicking the Button at the upper right corner of the image table dialog.
8-1-2 Creating Image Data Using Image Editor
Registering new image data
(1) Select [Image Editor] from the [Tools] menu.
The image table is displayed.
(2) Click the Button.
The New Image Entry dialog box is displayed.
(3) Set the code, size, colors, compression, comment of the image data to be
newly created, then click the Button.
Setting for New Image Entry dialog box
Code: Specify the code to which the new image data is regis-
tered.