Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 475 / 573

Appendix A
Data Conversion
466
Conversion from color display models to monochrome display models
Colors are converted into black or white as shown below.
Colors for objects other than Image
Black, blue, red, magenta: Black
Green, cyan, yellow, white: White
Colors for Image
Black: Black
Blue, red, magenta, green,
cyan, yellow, white:
White
Change the colors as needed.
Correcting the PLC addresses (On data conversion between direct accesses)
When converting the data between different direct accesses, it may be neces-
sary to change PLC addresses since corresponding PLC is changed. In this
manual, conversion between OMRON and MEMLINK is described.
Difference
OMRON: Various words are available such as CIO area and
data memory area.
Available word addresses differ depending on the
PLC that is used.
MEMLINK: Only memory link area (PT memory) can be used.
Available word addresses: 0000-9999
Conversion result, error message and corrective action.
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
With OMRON data,
an area other than
the CIO area is set. The PLC address is
reset. PLC address (XXX)
of YYY is invalid. It
is reset to default. Reset the area to
memory link area (PT
memory). If this PC
(PLC) address is re-
ferred to from the pro-
gram, it is necessary to
correct the program ac-
cordingly. (Refer to
6-1-10 Setting Proper-
ties.)
Correcting the PC (PLC) addresses (On data conversion between PT models)
When converting the data of the entire screen data file, screen data for use with
new models cannot be converted to screen data for use with conventional mod-
els. However, if the data of a new model is registered for the screen of a conven-
tional model using the symbol manager, the following points must be taken into
consideration due to differences in the usable PC (PLC) address range between
a conventional and a new model.
Difference
New models: Word addresses can be handled up to five digits.
Conventional models: Word addresses can be handled up to four digits.
Conversion result, error message and corrective action