Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 450 / 573

11-6 Section Setting and Reading the Date and Time
439
To set the time at a PT, set “Hour, Minute, and Second” here and execute
sending (downloading).
Click the button to download it to the PT.
To read the time data of a PT, execute receiving (uploading) and the result is
displayed here.
Click the button to upload it from the PT.
At first, the same contents as displayed at [Current Date & Time] are dis-
played.
Used to download the date and time data, set at [Date] and [Time], to a PT to
set them.
Used to upload the date and time data in a PT and display them at [Date] and
[Time].
(2) To set the date and time at a PT, set the data at [Date] and [Time] and click on
.
To read the date and time of a PT, click on .
Data transmission starts when or is clicked.
(3) Place the PT in the Transmit mode so that communications between the
Support Tool and the PT are enabled.
If the PT is not in the Transmit mode, a timeout error occurs in about 10 se-
conds at the Support Tool. In this case, set the PT in the Transmit mode and
click on
in the error message dialog box.
(4) In the case of receiving (uploading), the date and time data that have been
read from the PT are displayed at [Date] and [Time].