Omron NT - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 152 / 573

6-2 Section Fixed Display
139
End point: Indicates the position of the end point of an arc.
An arc is drawn anti-clockwise from the start point to the end
point.
Size: Indicates the radius of an arc.
Attribute: Specify the display attribute.
Standard, Inverse, Flash, Inverse Flash
Color
Foreground: Specify the line color.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Guidance
An arc is defined by the center point, the start point, and the end point
The line type is specified using line style attribute.
Center point: Indicates the position of the center of an arc.
End point: Indicates the position of the end point of an arc.
The end point can be dragged to the desired position.
Start point: Indicates the position of the start point of an arc.
When the start point is dragged, the start point position and
arc radius are changed.
6-2-3 Rectangle
A rectangle is drawn.
Rectangles cannot be used with NT11S/NT11, NT20, NT20S and NT600S.
(1) A rectangle is drawn. The length of a vertical and horizontal sides can be
changed.
Operation procedure
Selection using the menu bar: [Objects]
→
[Fixed Display]
→
[Rectangle]
Selection using the drawing toolbar: